|
| Browse Catalog [1] [2] |
|
Save 5% when you order a case of #80 latex in gallon size
|
Save 5% when you order a case of #80 latex in gallon size
|
|
Save 5% when you order a case of #80VLA latex in gallon size
|
Save 5% when you order a case of #874 latex in gallon size
|
|
A hardner for the L-200 casting latex.
|
#660 prevulcanized natural latex. #660 Latex is the prevulcanized form of #80. It was designed specifically for short run polyester work.
|
|
Number 80 is a vulcanizeable Natural Latex compounded from specially processed Latex with a solid content of between 68 and 70 percent, which minimizes shrinkage.
|
#80 VLA has the same characteristics as #80 ammoniated altex. It is slightly lower in solids content but has no noticeable odor of ammonia.
|
|
A new outstanding high solids latex has been developed by Cementex Latex Corporation for those who wish to make figurines or products out of cement or plaster. #874 Latex is low ammonia formulation of approximately 68% solids. It produces a superior mold of extraordinary resistance to the pouring of concrete and plaster. The #874 Latex produces fine line detail, gives long mold life and remains flexible for long periods of time.
|
Bluekote is a silicone molding compound that sets up with a shore hardness of 30.
|
|
A brush conditioner for brushing on Natural Latex.
|
Castor oil is an excellent release agent for natural latex for natural latex molds that are made for pouring cement. Cementex Castor Oil also has a rejuvenating effect upon natural latex and will usually bring it back to its natural consistency after it has been repeatedly used.
|
|
Ceco Powder is a filler for natural latex. It is a specialty blend of various powders and surfactants, which, when mixed into natural latex, thickens and strengthens the latex mold.
|
Cementex Latex Mold Making Manual
Mold Making Manual & Catalog
|
|
Coney Island Alginate Regular Set
|
|
|
Number 80 is a vulcanizeable Natural Latex compounded from specially processed Latex with a solid content of between 68 and 70 percent, which minimizes shrinkage.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
Fab-Tone colors are highly concentrated and should be used in small amounts. They mix into the latex extremely well to give brilliant shades.
|
|
A PVA (polyvinyl alcohol) type release. It is used as release agent between the vulcanized latex mold and the poyester resin. It is water soluble and solvent resistant.
|
Greenkote is a silicone molding compound that sets up with a shore hardness of 35.
|
|
L-200 is a prevulcanized casting Latex. It is very useful for the production of hollow molded rubber articles, toys, hot-water bottles, rubber balls, imitation pottery, masks, puppet heads, and display articles. It is also useful for coating polystyrene, texturing, and general special effects for theater work. L-200 is especially useful in making flexible props. Using L-200 does not require any elaborate machinery or expensive metal molds. An ideal rubber for small studios.
|
A water-based modeling clay that contains sulfur, is economical, and specifically designed for use with our natural latex. Because it contains sulfur, it should not be used with urethanes or silicones without a protecting release or separator. This clay is not developed for use in constructing originals.
|
|
Neoflex is a lower solids blend of natural and synthetic latex with no odor of ammonia. It is used to make thin glove molds for small objects. Its main feature is economy of price and time.
|
Cabosil is used as a thickening agent for urethanes, silicones and polyester resins.
|
|
1065 is a silicon molding compound that sets up with a shor hardness of 25.
|
SP-100 is a ready-to-use latex that is poured into a plaster of paris mold to reproduce a hard, hollow object. It is a special blend of latexes with proprietary ingredients. A hard cast is obtained. It is especially useful in making doll body parts, mannequin parts, puppet heads, and large display objects. It comes in a light-cream color.
|
|
AquaBlock RFU Sealant - Gallon
A high performance sealing agent that protects and waterproofs building materials
|
Constructing A Fiberglass Mother Mold (DVD)
A 75 minutes DVD that takes you through the detailed steps of constructing a fiberglass mother mold...featuring Joe Behnke, Director of the Benhke School of Moldmaking
|
|
D-Limonene is an excellent solvent for silicones. It is biodegradable and nonhazardous.
|
How to Make a Mold Video (DVD)
A 60 minute DVD that explains in full the process used by professional moldmakers.
|
|
 |
|
| Shopping cart powered by MonsterCommerce ecommerce solutions. |